K
Khách

Hãy nhập câu hỏi của bạn vào đây, nếu là tài khoản VIP, bạn sẽ được ưu tiên trả lời.

VII.Identify a mistake in the underlined words or phrases in the following sentences.

1.California has more land under irrigation than any another state.

2.Beside the ages of nine and fifteen, almost all young people undergo a rapid series of physiological changes.

3.In the 1920's cinema became an important art form and one of the ten largest industry in the United States.

4.To improve effectively, a musician must thorough understand the conventions of a given musical style.

5.Some hangars, buildings used to hold large aircraft, are very tall dial rain occasionally falls from clouds that form along the ceilings.

6.According to most psychological studies, body language expresses a speaker's emotions and attitudes and it also tends to affect the emotions and attitudes of the listen.

7.Chocolate is prepared by a complexity process of cleaning, blending, and roasting cocoa beans, which must be ground and mixed with sugar.

8.Antique collecting became a significant pastime in the 1980's when old object began to be appreciated for their beauty as well as for their historical importance.

9.American painter, Georgia O'Keeffe is well known as her large paintings of flowers in which single blossoms are presented (as if in close up).

10.Despite television is the dominant entertainment medium for United States households, Garrison Keillor's Saturday night radio show of folk songs and stories is heard by millions of people.

11.Ripe fruit is often stored in a place who contains much carbon dioxide so that the fruit will not decay too rapidly.

12.Mathew C. Perry, a United States naval commander, gained fame not in war and through diplomacy.

13.One of the most impressive collections of nineteenth-century European paintings in the United States can be found to the Philadelphia Museum of Art.

0
Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: Dancers must place all parts of their body in the correct position to attain  good line.

A. True

B. False

C. Not given (No)

1
23 tháng 6 2017

Đáp án: A

Help me PAPER RECYCLING A Paper is different from other waste produce because it comes from a sustainable resource: trees. Unlike the minerals and oil used to make plastics and metals, trees are replaceable. Paper is also biodegradable, so it does not pose as much threat to the environment when it is discarded. While 45 out of every 100 tonnes of wood fibre used to make paper in Australia comes from waste paper, the rest comes directly from virgin fibre from forests and plantations. By world...
Đọc tiếp

Help me

PAPER RECYCLING

A Paper is different from other waste produce because it comes from a sustainable resource: trees. Unlike the minerals and oil used to make plastics and metals, trees are replaceable. Paper is also biodegradable, so it does not pose as much threat to the environment when it is discarded. While 45 out of every 100 tonnes of wood fibre used to make paper in Australia comes from waste paper, the rest comes directly from virgin fibre from forests and plantations. By world standards, this is a good performance since the worldwide average is 33 percent waste paper. Governments have encouraged waste paper collection and sorting schemes and at the same time, the paper industry has responded by developing new recycling technologies that have paved the way for even greater utilization of used fibre. As a result, industry’s use of recycled fibres is expected to increase at twice the rate of virgin fibre over the coming years.

B Already, waste paper constitutes 70% of paper used for packaging and advances in the technology required to remove ink from the paper have allowed a higher recycled content in newsprint and writing paper. To achieve the benefits of recycling, the community must also contribute. We need to accept a change in the quality of paper products; for example, stationery may be less white and of a rougher texture. There also needs to support from the community for waste paper collection programs. Not only do we need to make the paper available to collectors but it also needs to be separated into different types and sorted from contaminants such as staples, paperclips, string and other miscellaneous items.

C There are technical limitations to the amount of paper which can be recycled and some paper products cannot be collected for re-use. These include paper in the form of books and permanent records, photographic paper and paper which is badly contaminated. The four most common sources of paper for recycling are factories and retail stores which gather large amounts of packaging material in which goods are delivered, also offices which have unwanted business documents and computer output, paper converters and printers and lastly households which discard newspapers and packaging material. The paper manufacturer pays a price for the paper and may also incur the collection cost.

D Once collected, the paper has to be sorted by hand by people trained to recognise various types of paper. This is necessary because some types of paper can only be made from particular kinds of recycled fibre. The sorted paper then has to be repulped or mixed with water and broken down into its individual fibres. This mixture is called stock and may contain a wide variety of contaminating materials, particularly if it is made from mixed waste paper which has had little sorting. Various machineries are used to remove other materials from the stock. After passing through the repulping process, the fibres from printed waste paper are grey in colour because the printing ink has soaked into the individual fibres. This recycled material can only be used in products where the grey colour does not matter, such as cardboard boxes but if the grey colour is not acceptable, the fibres must be de-inked. This involves adding chemicals such as caustic soda or other alkalis, soaps and detergents, water-hardening agents such as calcium chloride, frothing agents and bleaching agents. Before the recycled fibres can be made into paper they must be refined or treated in such a way that they bond together.

E Most paper products must contain some virgin fibre as well as recycled fibres and unlike glass, paper cannot be recycled indefinitely. Most paper is down-cycled which means that a product made from recycled paper is of an inferior quality to the original paper. Recycling paper is beneficial in that it saves some of the energy, labour and capital that go into producing virgin pulp. However, recycling requires the use of fossil fuel, a non-renewable energy source, to collect the waste paper from the community and to process it to produce new paper. And the recycling process still creates emissions which require treatment before they can be disposed of safely. Nevertheless, paper recycling is an important economical and environmental practice but one which must be carried out in a rational and viable manner for it to be useful to both industry and the community.

i. Process of paper recycling

ii. Less threat of waste paper to the environment

iii. Collection of paper for recycling

iv. Sources of paper for recycling

v. Bad sides of paper recycling

vi. Contribution of community to recycling paper

Your answer:

1. Paragraph A .......................

2. Paragraph B .......................

3. Paragraph C .......................

4. Paragraph D .......................

5. Paragraph E .......................

1
20 tháng 10 2018

Help me

PAPER RECYCLING

A Paper is different from other waste produce because it comes from a sustainable resource: trees. Unlike the minerals and oil used to make plastics and metals, trees are replaceable. Paper is also biodegradable, so it does not pose as much threat to the environment when it is discarded. While 45 out of every 100 tonnes of wood fibre used to make paper in Australia comes from waste paper, the rest comes directly from virgin fibre from forests and plantations. By world standards, this is a good performance since the worldwide average is 33 percent waste paper. Governments have encouraged waste paper collection and sorting schemes and at the same time, the paper industry has responded by developing new recycling technologies that have paved the way for even greater utilization of used fibre. As a result, industry’s use of recycled fibres is expected to increase at twice the rate of virgin fibre over the coming years.

B Already, waste paper constitutes 70% of paper used for packaging and advances in the technology required to remove ink from the paper have allowed a higher recycled content in newsprint and writing paper. To achieve the benefits of recycling, the community must also contribute. We need to accept a change in the quality of paper products; for example, stationery may be less white and of a rougher texture. There also needs to support from the community for waste paper collection programs. Not only do we need to make the paper available to collectors but it also needs to be separated into different types and sorted from contaminants such as staples, paperclips, string and other miscellaneous items.

C There are technical limitations to the amount of paper which can be recycled and some paper products cannot be collected for re-use. These include paper in the form of books and permanent records, photographic paper and paper which is badly contaminated. The four most common sources of paper for recycling are factories and retail stores which gather large amounts of packaging material in which goods are delivered, also offices which have unwanted business documents and computer output, paper converters and printers and lastly households which discard newspapers and packaging material. The paper manufacturer pays a price for the paper and may also incur the collection cost.

D Once collected, the paper has to be sorted by hand by people trained to recognise various types of paper. This is necessary because some types of paper can only be made from particular kinds of recycled fibre. The sorted paper then has to be repulped or mixed with water and broken down into its individual fibres. This mixture is called stock and may contain a wide variety of contaminating materials, particularly if it is made from mixed waste paper which has had little sorting. Various machineries are used to remove other materials from the stock. After passing through the repulping process, the fibres from printed waste paper are grey in colour because the printing ink has soaked into the individual fibres. This recycled material can only be used in products where the grey colour does not matter, such as cardboard boxes but if the grey colour is not acceptable, the fibres must be de-inked. This involves adding chemicals such as caustic soda or other alkalis, soaps and detergents, water-hardening agents such as calcium chloride, frothing agents and bleaching agents. Before the recycled fibres can be made into paper they must be refined or treated in such a way that they bond together.

E Most paper products must contain some virgin fibre as well as recycled fibres and unlike glass, paper cannot be recycled indefinitely. Most paper is down-cycled which means that a product made from recycled paper is of an inferior quality to the original paper. Recycling paper is beneficial in that it saves some of the energy, labour and capital that go into producing virgin pulp. However, recycling requires the use of fossil fuel, a non-renewable energy source, to collect the waste paper from the community and to process it to produce new paper. And the recycling process still creates emissions which require treatment before they can be disposed of safely. Nevertheless, paper recycling is an important economical and environmental practice but one which must be carried out in a rational and viable manner for it to be useful to both industry and the community.

i. Process of paper recycling

ii. Less threat of waste paper to the environment

iii. Collection of paper for recycling

iv. Sources of paper for recycling

v. Bad sides of paper recycling

vi. Contribution of community to recycling paper

Your answer:

1. Paragraph A ...........iii. Collection of paper for recycling............

2. Paragraph B ..........vi. Contribution of community to recycling paper.............

3. Paragraph C ...........iv. Sources of paper for recycling............

4. Paragraph D ............i. Process of paper recycling...........

5. Paragraph E ...........v. Bad sides of paper recycling............

Giúp mình đc ko mng PAPER RECYCLING A Paper is different from other waste produce because it comes from a sustainable resource: trees. Unlike the minerals and oil used to make plastics and metals, trees are replaceable. Paper is also biodegradable, so it does not pose as much threat to the environment when it is discarded. While 45 out of every 100 tonnes of wood fibre used to make paper in Australia comes from waste paper, the rest comes directly from virgin fibre from forests and...
Đọc tiếp
Giúp mình đc ko mng PAPER RECYCLING

A Paper is different from other waste produce because it comes from a sustainable resource: trees. Unlike the minerals and oil used to make plastics and metals, trees are replaceable. Paper is also biodegradable, so it does not pose as much threat to the environment when it is discarded. While 45 out of every 100 tonnes of wood fibre used to make paper in Australia comes from waste paper, the rest comes directly from virgin fibre from forests and plantations. By world standards, this is a good performance since the worldwide average is 33 percent waste paper. Governments have encouraged waste paper collection and sorting schemes and at the same time, the paper industry has responded by developing new recycling technologies that have paved the way for even greater utilization of used fibre. As a result, industry’s use of recycled fibres is expected to increase at twice the rate of virgin fibre over the coming years.

B Already, waste paper constitutes 70% of paper used for packaging and advances in the technology required to remove ink from the paper have allowed a higher recycled content in newsprint and writing paper. To achieve the benefits of recycling, the community must also contribute. We need to accept a change in the quality of paper products; for example, stationery may be less white and of a rougher texture. There also needs to support from the community for waste paper collection programs. Not only do we need to make the paper available to collectors but it also needs to be separated into different types and sorted from contaminants such as staples, paperclips, string and other miscellaneous items.

C There are technical limitations to the amount of paper which can be recycled and some paper products cannot be collected for re-use. These include paper in the form of books and permanent records, photographic paper and paper which is badly contaminated. The four most common sources of paper for recycling are factories and retail stores which gather large amounts of packaging material in which goods are delivered, also offices which have unwanted business documents and computer output, paper converters and printers and lastly households which discard newspapers and packaging material. The paper manufacturer pays a price for the paper and may also incur the collection cost.

D Once collected, the paper has to be sorted by hand by people trained to recognise various types of paper. This is necessary because some types of paper can only be made from particular kinds of recycled fibre. The sorted paper then has to be repulped or mixed with water and broken down into its individual fibres. This mixture is called stock and may contain a wide variety of contaminating materials, particularly if it is made from mixed waste paper which has had little sorting. Various machineries are used to remove other materials from the stock. After passing through the repulping process, the fibres from printed waste paper are grey in colour because the printing ink has soaked into the individual fibres. This recycled material can only be used in products where the grey colour does not matter, such as cardboard boxes but if the grey colour is not acceptable, the fibres must be de-inked. This involves adding chemicals such as caustic soda or other alkalis, soaps and detergents, water-hardening agents such as calcium chloride, frothing agents and bleaching agents. Before the recycled fibres can be made into paper they must be refined or treated in such a way that they bond together.

E Most paper products must contain some virgin fibre as well as recycled fibres and unlike glass, paper cannot be recycled indefinitely. Most paper is down-cycled which means that a product made from recycled paper is of an inferior quality to the original paper. Recycling paper is beneficial in that it saves some of the energy, labour and capital that go into producing virgin pulp. However, recycling requires the use of fossil fuel, a non-renewable energy source, to collect the waste paper from the community and to process it to produce new paper. And the recycling process still creates emissions which require treatment before they can be disposed of safely. Nevertheless, paper recycling is an important economical and environmental practice but one which must be carried out in a rational and viable manner for it to be useful to both industry and the community.

i. Preocess of paper recycling

ii. Less threat of waste paper to the environment

iii. Collection of paper for recycling

iv. Sources of paper for recycling

v. Bad sides of paper recycling

vi. Contribution of community to recycling paper

Your answer:

1. Paragraph A .......................

2. Paragraph B .......................

3. Paragraph C .......................

4. Paragraph D .......................

5. Paragraph E .......................

0
Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: Most classes begin with slow exercises that increase balance and fluid (flowing, not jerky) motion.

A. True

B. False

C. Not given (No)

1
30 tháng 12 2018

Đáp án: A

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: The turned-out pose gives a performer a more satisfying “line.”

A. True

B. False

C. Not given (No)

1
15 tháng 8 2018

Đáp án: A

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: Girls who study ballet generally begin later than boys

A. True

B. False

C. Not given (No)

1
19 tháng 6 2017

Đáp án: B

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: Ballet students perform all of these positions with the legs turned external at the hip.

A. True

B. False

C. Not given (No)

1
15 tháng 8 2018

Đáp án: A

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: Without training dancers can improve their line.

A. True

B. False

C. Not given (No)

1
15 tháng 8 2018

Đáp án: B

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)HOW ARE BALLET DANCERS TRAINED?Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after...
Đọc tiếp

Read the passage and statements below carefully, and then say whether the statements are true (T), false (F) or not given (No)

HOW ARE BALLET DANCERS TRAINED?

Girls who study ballet generally begin by age eight to ten. Boys often start later. Ballet training is hard work. Ballet students must develop strength, balance, and flexibility as well as grace. They must learn a set of movements and gestures. Girls also learn to dance on their toes. They usually begin pointe (tip-of-the-toes) work after three years of training.

All ballet students practice five basic positions of the feet. These five positions form the basis of almost all ballet steps. All of these positions are performed with the legs turned outward at the hip. The feet should be able to form a straight line on the floor.

The turned-out position gives a dancer a more pleasing “line.” Line has to do with the placement of the dancer’s body, in motion and at rest. All parts of the dancer’s body must be placed in the correct position to achieve good line. Training can improve a dancer’s line. Good line gives a dancer the greatest stability and ease of movement. It also makes the dancer’s body seem light in weight.

All dancers take daily classes to keep their bodies flexible and strong. Most classes begin with warm-up exercises at the barre, a railing that dancers hold onto for support. The second part of the class consists of slow exercises that develop balance and fluid (flowing, not jerky) motion. After this, dancers practice quick movements, such as small jumps and leg extensions, and then large steps, turns, and leaps.

Question: So as to keep their bodies flexible and strong all dancers take daily classes.

A. True

B. False

C. Not given (No)

1
3 tháng 4 2019

Đáp án: A